|
K-TORK
speed controls adjust the OPEN & CLOSE stroke time of the
actuator. Always remember to allow full air supply pressure to the
actuator and create speed control by restricting the air as it is exhausted
from the actuator. There are two types:
Exhaust
Speed Controls
Precision solenoid valve exhaust snubbers monitor and
muffle the supply air as it is exhausted from the actuator.
- 1/8, ¼, 3/8 & ½ NPT
sizes available.
- Adjustable & accurate valve cycle times.
- Lock nut to ensure repeatable speeds.
- Muffler silences exhaust air during actuator
stroke.
Inline
Speed Controls
Install between the solenoid valve and the actuator. They allow
free flow supply air into the actuator and restrict the exhaust
air in the opposite direction. Generally mounted in the actuator
supply air ports.
- ¼, 3/8 & ½ NPT sizes
available.
- Adjustable & accurate valve cycle times.
- Lock nut to ensure repeatable speeds.
|
ESTIMATED CYCLE TIME ADJUSTMENT BY ACTUATOR MODEL
|
|
K-TORK MODEL
|
CYCLE TIME RANGE
|
|
Model # K-1 to #K-2
|
2 to 60 seconds
|
|
Model # K-3 to #K-4
|
5 to 90 seconds
|
|
Model # K-5 to #K-7
|
10 to 180 seconds
|
K-TORK
combination air filters ensure the long life of K-TORK actuators. Both
sizes consist of a particulate upstream pre-filter and a coalescing
downstream filter.
- Particulate filter rated to 5 micron particles.
- Coalescing filter rated to 0.1 micron particles.
- Available in 3/8 and ¾ NPT sizes.
- Includes differential pressure indicator and gauge.
- Includes automatic drain bowl.
- Includes liquid level indicator.
- Rated to 250 PSI maximum supply pressure.
|